VisioTac‪t‬1.0.4 - App Store

Please wait ... The app listing is being verified for availability.
You'll be able to see results in few seconds.


Publisher Description

Visualisation et pilotage de caméras

Mar 2, 2016 Version 1.0.4
Apple a mis à jour cette app afin d’utiliser le certificat de signature Apple le plus récent.

We correct some issues .
View controller-based status bar appearance = NO
Change Listes des sites with Listes.
Show alert when we take photo.
Change Plus button with 'Ajouter' button.
Correct some minor bug in the configuration interface.
Change some icons in the configuration interface.
Correct Light button function.
Correct camera number function.
Add old encoder compatibilities

You pass to the authentication page. You enter the login and password as follow: Login="admin" and Password= "admin".
You must write the login and password lowercase.
To enter the parameter of the application, click on Visionaute top left button and write "admin" , "admin" as login and password.
To show the stream video of camera follow the printed screens. To access to video, you must follow the following steps. You need to click on Visionaute top left Button. After that, yo type 'admin' as login and 'admin' as password and click OK. If you login correctly, you click on cameras button. You click on add button to add a site ( ‘Ajouter’ witch situated on top right window ). You type a libelle site. You active the Site Distant Switch button . You must type 'showroom' as Login and 'showroom' as Mot de Passe and click save. After that, you will have your site saved in the list of sites. Click it. You will have list of cameras. You Click on add button to add new cameras to this site ( ‘Ajouter’ witch situated on top right window ). Type Libelle Camera as 'Camera1', and type '1' as Numero channel, and type '1' as Numero Camera. Deactivate Flux Principale. You must choose a position and save. Click on ‘Retour' button. Again ‘Retour’ Button. And finally click on Retour Menu button.You click on 'c1' left down Button. And click on your positon button witch is already chosen. You will have your have access to video.



About VisioTac‪t‬

VisioTac‪t‬ is a free app for iOS published in the Other list of apps, part of Network & Internet.

The company that develops VisioTac‪t‬ is VISIONAUTE. The latest version released by its developer is 1.0.4.

To install VisioTac‪t‬ on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2016-03-02 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the VisioTac‪t‬ as malware if the download link is broken.

How to install VisioTac‪t‬ on your iOS device:

  • Click on the Continue To App button on our website. This will redirect you to the App Store.
  • Once the VisioTac‪t‬ is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
  • If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
  • After VisioTac‪t‬ is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
  • Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.

Program Details


General

Publisher
Released Date
2016-03-02
Languages
English

Category

Category
Subcategory

System requirements

Operating systems
iOS

Download information

File size
N/A
Total downloads
0

Pricing

License model
Free
Price

Version History


Here you can find the changelog of VisioTac‪t‬ since it was posted on our website on 2016-11-03.The latest version is 1.0.4 and it was updated on Apps112 on 03 November, 2026.See below the changes in each version:

version 1.0.4

posted on 2016-03-02

Mar 2, 2016 Version 1.0.4
Apple a mis à jour cette app afin d’utiliser le certificat de signature Apple le plus récent.

We correct some issues .
View controller-based status bar appearance = NO
Change Listes des sites with Listes.
Show alert when we take photo.
Change Plus button with 'Ajouter' button.
Correct some minor bug in the configuration interface.
Change some icons in the configuration interface.
Correct Light button function.
Correct camera number function.
Add old encoder compatibilities

You pass to the authentication page. You enter the login and password as follow: Login="admin" and Password= "admin".
You must write the login and password lowercase.
To enter the parameter of the application, click on Visionaute top left button and write "admin" , "admin" as login and password.
To show the stream video of camera follow the printed screens. To access to video, you must follow the following steps. You need to click on Visionaute top left Button. After that, yo type 'admin' as login and 'admin' as password and click OK. If you login correctly, you click on cameras button. You click on add button to add a site ( ‘Ajouter’ witch situated on top right window ). You type a libelle site. You active the Site Distant Switch button . You must type 'showroom' as Login and 'showroom' as Mot de Passe and click save. After that, you will have your site saved in the list of sites. Click it. You will have list of cameras. You Click on add button to add new cameras to this site ( ‘Ajouter’ witch situated on top right window ). Type Libelle Camera as 'Camera1', and type '1' as Numero channel, and type '1' as Numero Camera. Deactivate Flux Principale. You must choose a position and save. Click on ‘Retour' button. Again ‘Retour’ Button. And finally click on Retour Menu button.You click on 'c1' left down Button. And click on your positon button witch is already chosen. You will have your have access to video.

version 1.0.4

posted on 2020-03-03

2 mars 2016 Version 1.0.4
Apple a mis à jour cette app afin d’utiliser le certificat de signature Apple le plus récent.

We correct some issues .
View controller-based status bar appearance = NO
Change Listes des sites with Listes.
Show alert when we take photo.
Change Plus button with 'Ajouter' button.
Correct some minor bug in the configuration interface.
Change some icons in the configuration interface.
Correct Light button function.
Correct camera number function.
Add old encoder compatibilities

You pass to the authentication page. You enter the login and password as follow: Login="admin" and Password= "admin".
You must write the login and password lowercase.
To enter the parameter of the application, click on Visionaute top left button and write "admin" , "admin" as login and password.
To show the stream video of camera follow the printed screens. To access to video, you must follow the following steps. You need to click on Visionaute top left Button. After that, yo type 'admin' as login and 'admin' as password and click OK. If you login correctly, you click on cameras button. You click on add button to add a site ( ‘Ajouter’ witch situated on top right window ). You type a libelle site. You active the Site Distant Switch button . You must type 'showroom' as Login and 'showroom' as Mot de Passe and click save. After that, you will have your site saved in the list of sites. Click it. You will have list of cameras. You Click on add button to add new cameras to this site ( ‘Ajouter’ witch situated on top right window ). Type Libelle Camera as 'Camera1', and type '1' as Numero channel, and type '1' as Numero Camera. Deactivate Flux Principale. You must choose a position and save. Click on ‘Retour' button. Again ‘Retour’ Button. And finally click on Retour Menu button.You click on 'c1' left down Button. And click on your positon button witch is already chosen. You will have your have access to video.

version 1.0.4

posted on 2016-03-02

Mar 2, 2016 Version 1.0.4
We correct some issues .
View controller-based status bar appearance = NO
Change Listes des sites with Listes.
Show alert when we take photo.
Change Plus button with 'Ajouter' button.
Correct some minor bug in the configuration interface.
Change some icons in the configuration interface.
Correct Light button function.
Correct camera number function.
Add old encoder compatibilities

You pass to the authentication page. You enter the login and password as follow: Login="admin" and Password= "admin".
You must write the login and password lowercase.
To enter the parameter of the application, click on Visionaute top left button and write "admin" , "admin" as login and password.
To show the stream video of camera follow the printed screens. To access to video, you must follow the following steps. You need to click on Visionaute top left Button. After that, yo type 'admin' as login and 'admin' as password and click OK. If you login correctly, you click on cameras button. You click on add button to add a site ( ‘Ajouter’ witch situated on top right window ). You type a libelle site. You active the Site Distant Switch button . You must type 'showroom' as Login and 'showroom' as Mot de Passe and click save. After that, you will have your site saved in the list of sites. Click it. You will have list of cameras. You Click on add button to add new cameras to this site ( ‘Ajouter’ witch situated on top right window ). Type Libelle Camera as 'Camera1', and type '1' as Numero channel, and type '1' as Numero Camera. Deactivate Flux Principale. You must choose a position and save. Click on ‘Retour' button. Again ‘Retour’ Button. And finally click on Retour Menu button.You click on 'c1' left down Button. And click on your positon button witch is already chosen. You will have your have access to video.

version 1.0.4

posted on 2015-09-11

Disclaimer


Official App Store Link


We do not host VisioTac‪t‬ on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.

The App Store link for VisioTac‪t‬ is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.

If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.





Click stars to rate this APP!

Users Rating:
  0.0/5     0
Downloads: 0
Updated At: 2026-11-03
Publisher: VISIONAUTE
Operating System: iOS
License Type: Free

TOP DOWNLOADS
in Network & Internet last week